I was going to start with bolt-ons that would work with the BBK and get the JRSC in 2007 but I may save my bolt-on money and go with a used SC a little sooner. If so, I'll worry about bolt-ons later, if at all. Before I commit to a used SC though, I'd like to have its parts list so I can tell if it actually has all their parts before I buy it. I'd hate to buy one used only to find out that it had missing parts and that I can't get the missing parts without bringing the cost up to close to what a new one would've been...
here is the parts list you were looking for you'll have to go to jacksonracing.com and click on order by part number to view a discription or buy any of these. they are expensive but they are availible if you need any of them. I went through the same thing I bought mine used and it didnt come with all the brackets.
Item No. Description Quantity
995-000 SUPERCHARGER SYSTEM 1.00
988-042 S/C SUPPORT BRACKET KIT 3 1.00
051-081 WASHER, FLAT, M10 2.00
051-084 BOLT, HEX, M10-1.50 X 50 G8.8 2.00
051-186 NUT,FLANGED,8X1.25,12AF 1.00
051-505 BOLT FLANGED M8X25X1.25 12 AF 1.00
051-506 BOLT, HEX FLANGE M8-1.25 X 30 1.00
051-657 BRACKET, S/C SUPPORT STRAP 1.00
051-658 BRACKET, S/C SUPPORT LOWER 1.00
772-316 ALUMINUM, 2.7X4.7X1.125 1.00
772-217 BLACK, ANODIZE 0.56
988-105 ALT/BELT DRIVE BRACKET - FOCUS 1.00
051-081 WASHER, FLAT, M10 1.00
051-505 BOLT, HEX FLANGE M8-1.25 X 25 2.00
051-627 PULLEY, 2.0IN IDLER, PLASTIC 1.00
051-762 BOLT,HEX FLANGE,M10 X1.25 X 30 1.00
052-170 BRACKET, ALTERNATOR - GEN. 2 1.00
988-211 INTAKE MANIFOLD ASSY - FOCUS 1.00
051-098 BYPASS VALVE 1.00
051-121 SCREW, SHCS, M6 X 1.0 X 16 4.00
051-142 HOSE BARB, 5/32 VACUUM 2.00
051-144 HOSE, SILICONE, 1.5 ID X 1.25 1.00
051-189 CLAMP, HOSE, MINI, 2INCH 2.00
051-364 PLUG, PIPE, AH, 1/4 NPT 1.00
051-503 BOLT M8 X 0.75 X 10 WI PLUG 1.00
051-505 BOLT, HEX FLANGE M8-1.25 X 25 2.00
051-529 GASKET, JR BYPASS-MANIFOLD 1.00
051-553 CLIP RETAINING 7/32 VACUUM 1.00
051-660 INTAKE MANIFOLD - FOCUS 1.00
051-794 GASKET, INTAKE MANIFOLD 1.00
051-796 HOSE, VACUUM, 7/32 X 14 IN 1.00
051-551 HOSE, VACUUM, 7/32 ID, BULK 14.00
051-797 HOSE BARB,1/4NPT X 1/2 X 45DEG 1.00
988-307 SUPERCHARGER ASSEMBLY - FOCUS 1.00
051-122 STUD, M8 X 1.25 X 40 1.00
051-142 HOSE BARB, 5/32 VACUUM 1.00
051-207 AHCS M8X1.25X25 2.00
051-528 GASKET,GEN3 S/C-TB ADAPTOR 1.00
051-656 S/C GEN3 M45 CW 3.0-6R 1.00
051-662 TB ADAPTER FOCUS 1.00
051-680 HOSE BARB, 3/8 VACUUM 1.00
051-783 AHCS, M8 X 1.25 X 55 1.00
051-938 NUT, FLANGE, M8X1.25, 10MM A/F 1.00
988-423 HOSE BAG 1.00
051-134 VACUUM TEE 3/8 1.00
051-235 CLAMP, HOSE, SAE NO. 44 2.00
051-259 HOSE, VACUUM, 5/32 IN., BULK 35.00
051-389 TEE, VACUUM, 3/16 1.00
051-513 CLAMP, HOSE, NO 8 2.00
051-665 HOSE, PCV, 1/2IN BULK 2.00
051-669 HOSE, FLEX LOPRENE 1.00
051-758 HOSE, SILICONE, 7MM ID, BLACK 32.00
052-201 TEE, VACUUM, 3/8 X 1/4 X 3/8 1.00
052-211 HOSE, VACUUM, 1/4, BULK 6.00
770-268 LOOM SLIT, CONVOLUDED, 1/2 DIA 36.00
051-320 ELBOW,VACUUM, 1/8X11/64X90 DEG 1.00
051-372 SLIT LOOM.1/4 INCH 12.00
163-655 HOSE, VACUUM, BLACK PLASTIC 3.00
988-703 GASKETS - LOCTITE - ZIP TIES 1.00
051-016 CABLE TIE 8.00
220-136 REMOVABLE THREADLOCKER 1.00
051-525 GASKET, M45 S/C MANIFOLD 1.00
051-395 SPADE CON, MALE, 18-22 GA 1.00
051-387 SPADE CON, FEMALE, 22-18 GA 1.00
988-812 INSTRUCTIONS AND STICKERS 1.00
051-473 JR WARRANTY CARD 1.00
051-676 INSTRUCTIONS FOR FOCUS 1.00
052-010 STICKER, PREMIUM FUEL REQUIRED 1.00
052-282 CARB E.O. STICKER 1.00
988-913 HARDWARE BAG 1.00
051-004 BOLT,HEX FLANGE,M6 X 1.00 X 15 4.00
051-074 WASHER, FLAT, M8 4.00
051-075 WASHER, LOCK, M8 4.00
051-119 BOLT, HEX FLANGE M6-1.0 X 10 1.00
051-125 STUD, FULL THREAD 8 X 50 X1.25 9.00
051-127 BOLT, HEX FLANGE M8-1.25 X 20 1.00
051-135 BOLT, HEX FLANGE M8-1.25 X 40 1.00
051-186 NUT, HEX FLANGE M8-1.25 9.00
051-663 SCREW, SET, M8 X 1.25 X 50 2.00
051-677 STUD, M10 X 1.5 X 50 1.00
051-678 NUT, FLANGE, M10 X 1.5, 15 AF 1.00
051-714 BRACKET, SC - ALTERNATOR 1.00
051-717 SPACER, .33 ID X .63 OD X .33 1.00
770-137 ALUMINUM, ROD, 0.625 0.53
051-718 SPACER, .33 ID X .63 OD X 1.80 1.00
770-137 ALUMINUM, ROD, 0.625 2.03
051-754 ALLEN WRENCH, 4MM 1.00
051-761 BOLT,HEX, M8 X 1.25 X 90 4.00
051-788 BOLT, HEX FLANGE M10-1.5 X 40 2.00
052-911 BELT, 6PK2655 1.00
988-915 HARDWARE BAG 1.00
051-003 BOLT, HEX FLANGE,M6 X 1.0 X 12 4.00
051-728 BRACKET, MOUNTING, P/S 1.00
051-729 BRACKET, ADAPTER, P. STEERING 1.00
051-787 NUT, FLANGE, M6 X 1.0, 10 AF 4.00
051-789 SCREW, TAPPING, M6.3-1.81 X 20 1.00
051-696 BADGE, JACKSON RACING 2.00
052-404 DFMM - FOCUS ZX3 1.00
052-405 FUEL CONTROLLER ZX3 1.00
052-071 LICENSE PLATE FRAME, JR 1.00
051-381 BOX, 30 X 15 X 15 350LB TEST 1.00
051-889 BOX, 15 X 15 X 5 1.00
051-942 BOX, 24 X 14 X 14, 275LB TEST 1.00
The Powerworks web site has the install instructions on it and should have a parts list also.
Personaly I would go with Powerworks. Its a complete system (provided you get all the parts if you get a used one.... By the way... Why would someone sell one used... All the time and labor of putting it in just to spend more time taking it off????Bosen't seem like it would be worth it....) The Powerworks system is inter cooled also. I also have driven a couple PowerWorks powerd cars(actually owned by PowerWorks employees & engineers) and I was highly impressed... Thats the route I am going when I do it.
