Fog/driving lamp mod :
Pull relay 13.
Carefully remove the cap from the relay.
Place a NON-CONDUCTIVE piece of material between the coil and armature of the relay so the relay will not make contact when energized. (I used a short piece of nylon zip tie)
Replace the cap.
Replace the relay.
Turn on ignition - turn on parking lamps and pull out on light switch to check your work.
Time to perform this modification: Approx 5 minutes. (once you get the @%&^&#$% relay out of it's socket)
Last edited on Tue Jun 29th, 2004 06:41 pm by mchedd
____________________ Mike '02 SVTF #4241
|