All I need to know is where to connect the blue (Remote Turn-On) wire... That's it... Everything else I have rigged well enough to where it works and still looks good...
The wire harness doesn't have a remote turn-on wire coming from it so I need to know where to connect this... I tried connecting it to a speaker wire but though it does turn on the amp, not enough to power the subwoofers... I dont know where else to put this and I'm a bit noobish to accessory wires and ignition wires blah blah blah... So I need mucho help... thx
Ok what kinda amp are you using and are you trying to connect the remote wire to the amp or to the LOC? and why did you hook it up to a speaker wire? you need to find a switched 12 volts...1 12 volts that is only on when the car is on...where are you located at?
____________________ Captain Morgan and Dr.Pepper are my homies....
I wanted a wire that would turn on when the car turned on so I tired the speaker wire... I already had that wire cut to splice in the RCA converter so I tried it anyways... I know I need to wire it into my ignition wire but I've never worked with one before so I dont know which wire to use/cut...
I don't want a switch because it's for my girlfriends car... I know one day she wont forget to turn it off and then I'll have to hear about it...
I connected it to the yellow wire instead since it was an accessory wire... Seems to work fine... This will be my installation of an amp into a factory radio... What a pain in the ass... Thanks for the help...
